Easter Card 2 - Set of 17    

5in designs

6 Cards with extra designs and lettering to create your own combinations

 

Designs in package 

JJ1Easter Card -- 3.8" x 5.0"

JJ2Easter Card  -- 3.9" x 5.1"

JJ3Easter Card  -- 3.5" x 5.0"

JJ4Easter Card -- 4.4" x 4.8"

JJ5Easter Card -- 4.6" x 4.8"

JJ6Easter Card  -- 4.5" x 5.5"

JJ7Easter eggs -- 3.6" x 3.6"

JJ8Easter Cross -- 2.4" x 2.8"

JJ10Easter Basket -- 2.5" x 3.1"

JJ11Easter Bunny  -- 2.7" x 3.1"

JJ12Flower bowl -- 4.0" x 2.8"

JJ13Happy Easter 1-- 3.5" x .9"

JJ14Happy Easter 2  -- 3.5" x 1.5"

JJ15HappyHippity  -- 4.6" x 2.3"

JJ16Happy Easter 3  -- 4.7" x 1.5"

JJ17Wishing You -- 3.9" x 1.1"

Clipart by  www.DesignStitch.com

 

Matching FS Easter Eggs  click picture

 

 All the designs in the photo above are all stitched directly on to plain card stock.

The card stock was purchased from the local  craft shop in a package of 40 blank folding cards (with envelopes) sized at 6.5 by 5 inches folded for under $10.  The store also has a Value pack of 25 envelopes and 25 folding cards--5 1/2 x 4inch cards for $6. Both packages state "Heavy card stock".

Steps:

1. Hoop a cutaway stabilizer & spray top with Spray adhesive & Use a #10 Sharp needle

2.  Find & mark with a light pencil dot the center front of the card

3.  Lay the card (wrong side down) on top of stabilizer-centering the the design & center of the card

4.  Hold card down firmly in place, start machine off very slowly to 2nd stitch and proceed slowly

5.  Make sure that the card stays flat on the stabilizer or the stitches will go through.

6. When the design is complete, trim 3 sides stabilizer, and glue the trimmed 4th side to cover the stitches.

 

Have fun adding your own personal messages to each individual card!

Print a message on the computer before you embroider the card.

 

Do you have the Pfaff or Viking 150 x 150 All Fabric Hoops? 

This card fits perfectly in that hoop for the 5inch designs.

 

Return

The entire contents of this web site are copyright 2001-2010

Judi Jaksa Custom Digitizer www.customdigitizer.com