Be Still My Heart Designs Set 1& 2 for Redwork & Cards

6 designs in 3 sizes

 

Each Design gives you  2 basic heart outlines (Color 1 & 2) to allow for quick fabric appliqué of sheer, Mylar, netting or regular fabric. Trim after Color 2. A 2nd idea is to just put your appliqué under the center small design.

 

Designs in package

JJ01Be Still My Heart 100mm--99.4 mm x 87.6 mm (3.91 x  3.45 inches)
JJ01Be Still My Heart 120mm--119.6 x 105.4 mm( 4.71 x 4.15inches)

JJ01Be Still My Heart 140mm--122.8 x 139.6 mm (4.83 x 5.5 inches)

 

JJ02Be Still My Heart 100mm--99.2 mm x 83.6 mm (3.91 x  3.45 inches)

JJ02Be Still My Heart 120mm--119.6 x 100.8 mm( 4.71 x 4.15inches)

JJ02Be Still My Heart 140mm--139.6 x 117.8 mm (5.5 x 4.83 inches)

 

JJ03Be Still My Heart 100mm--99.2 mm x 80.7 mm (3.91 x  3.18 inches)

JJ03Be Still My Heart 120mm--119.7 x 96.7 mm( 4.71 x 3.81 inches)

JJ03Be Still My Heart 140mm--139.7 x 112.7 mm (5.5 x 4.44 inches)

Clipart by Diddybag.com

JJ04Be Still My Heart 100mm--99.2 mm x 84.5 mm (3.91 x  3.33 inches)

JJ04Be Still My Heart 120mm--119.4 x 101.9 mm( 4.7 x 4.01 inches)

JJ04Be Still My Heart 140mm--139.6 x 119.3 mm (5.5 x 4.7 inches)

 

JJ05Be Still My Heart 100mm--99.2 mm x 84.6 mm (3.91 x  3.33 inches)

JJ05Be Still My Heart 120mm--119.4 x 101.9 mm( 4.7 x 4.01 inches)

JJ05Be Still My Heart 140mm--139.8 x 119.3 mm (5.5 x 4.7 inches)

 

JJ06Be Still My Heart 100mm--99.2 mm x 89.6 mm (3.91 x  3.53 inches)

JJ06Be Still My Heart 120mm--119.4 x 108 mm( 4.7 x 4.25 inches)

JJ06Be Still My Heart 140mm--139.6 x 126.4 mm (5.5 x 4.98 inches)

 

Card 5 uses Mylar under the Heart and red sheer under the top flower and center heart design.

Card 6 with Red sheer & Card 4 with gold netting

 

All Designs

 

 

 

 

These are quick and easy cards to make!

All 6 5inch designs are stitched directly on the blank greeting cardstock.

The cardstock makes 5 x 6.5 inch cards and came with envelopes.

This was purchased from my local craft store

Steps:

1. Hoop a cutaway stabilizer & spray top with Spray adhesive & Use a Sharp needle size 10

2.  Find & mark with a light pencil dot the center front of the card

3.  Lay the card (wrong side down) on top of stabilizer-centering the the design & center of the card

4.  Hold card down firmly in place, start machine off very slowly to 2nd stitch and proceed slowly

5.  Make sure that the card stays flat on the stabilizer or the stitches will go through.

6. When the design is complete, trim excess stabilizer, place layer of cardstock or nice fabric to cover the inside.

Have fun adding your own personal messages to each individual card!

 

Do you have the Pfaff 150 x150 All Fabric Hoop? 

This card fits perfectly in that hoop for the 5inch designs.

 

BACK

The entire contents of this web site are copyright © 2001-2014

Judi Jaksa Custom Digitizer www.customdigitizer.com